You can use the software if you have the driver card data as a file. For this, the full version Tachoplus offers an export function to send the data via email to the driver and to view them privately with the TachoPlus Driver. Alternatively, you can read the driver card data directly with a chip card reader. You can also use a download key to temporarily save the driver card data and read it into the TachoPlusDriver.
CHIPDRIVE® Smartcard Commander is the ideal solution to edit and manage data saved on different types of smart cards. The software uses one user interface for different card types that are identified automatically after insertion. Suitable editing functions are provided for every card type. Common smart cards like health insurance cards, signature cards, HBCI cards or GSM cards show comfortable display masks and can be fully or partially edited and managed. Furthermore, there are low level functions for memory and processor cards for private applications.
1) Installation of the module for the pcmcia card GRP400:This is necessary to handle the PCMCIA.Download the sources of the pcmcia-cs [PCMCIA-CS]user% tar xvzf pcmcia-cs-3.1.34.tar.gzDownload the module for the GPR400 [????]Following the README of gpr400_cs-0.9.6.tar.gzi.e:user% cd pcmcia-cs-3.1.34user% tar xvzf gpr400_cs-0.9.6.tar.gzChange the value of #define PCMCIA_DEBUG from 1 to 0 in the gpr400_cs.cuser% make configuser% make allGet the root privileges.root% make installroot% mknod /dev/gpr400 c 123 0root% chmod 0666 /dev/gpr4002) Installation of the GPR400 PC/SC driver:Download the source ifd-gpr400-0.3.tar.gz [????]Get the root privileges.root% cd /dev/pcscroot% ln -s ../gpr400 5root% cd /usr/local/pcsc/driversroot% tar xvzf ifd-gpr400-0.3.tar.gzroot% cd ifd-gpr400-0.3Add at the beginning of the CFLAGS -I/usr/local/pcsc/include in the MakefileComment in the pcscdefines.h file the following lines:/*typedef unsigned long DWORD;typedef unsigned long* PDWORD;typedef unsigned char UCHAR;typedef unsigned char* PUCHAR;typedef char* LPSTR;typedef long RESPONSECODE;*/Copy ifdhandler.h from ifd-devkit-1.0.0.tar.gz or from an old version of pcsc-lite (for instance 1.0.1) in the directory. make Add in /etc/reader.conf the following entry:FRIENDLYNAME "Gemplus GPR400 Reader"DEVICENAME GPR400LIBPATH /usr/local/pcsc/drivers/ifd-gpr400-0.3/libgpr400_ifd.soCHANNELID 5NoteI have submitted a modified version of this driver to Joe Phillips. 2b1af7f3a8